7月最新发布11.2.0.1.2 Patch set update

7月13日,11g release 2 的第二个补丁集更新发布了;9i的最终版本为9.2.0.8,10g上10.2.0.5很有可能成为最终版本,我们预期今后(11g,12g)中Patch set数量会有效减少,而patch set update数量可能大幅增加;这样的更新形式可以为Oracle Database提升一定的软件形象。可以猜想11gr2的最终版本号可能是11.2.0.2/3.x。

附该psu的readme note:

Released: July 13, 2010

This document is accurate at the time of release. For any changes and additional information regarding PSU 11.2.0.1.2, see these related documents that are available at My Oracle Support (http://support.oracle.com/):

  • Note 854428.1 Patch Set Updates for Oracle Products
  • Note 1089071.1 Oracle Database Patch Set Update 11.2.0.1.2 Known Issues

This document includes the following sections:

1 Patch Information

Patch Set Update (PSU) patches are cumulative. That is, the content of all previous PSUs is included in the latest PSU patch.

PSU 11.2.0.1.2 includes the fixes listed in Section 5, “Bugs Fixed by This Patch”.

Table 1 describes installation types and security content. For each installation type, it indicates the most recent PSU patch to include new security fixes that are pertinent to that installation type. If there are no security fixes to be applied to an installation type, then “None” is indicated. If a specific PSU is listed, then apply that or any later PSU patch to be current with security fixes.

Table 1 Installation Types and Security Content

Installation Type Latest PSU with Security Fixes
Server homes PSU 11.2.0.1.2


Client-Only Installations None
Instant Client Installations None

(The Instant Client installation is not the same as the client-only Installation. For additional information about Instant Client installations, see Oracle Database Concepts.)

2 Patch Installation and Deinstallation

This section includes the following sections:

2.1 Platforms for PSU 11.2.0.1.2

For a list of platforms that are supported in this Patch Set Update, see My Oracle Support Note 1060989.1 Critical Patch Update July 2010 Patch Availability Document for Oracle Products.

2.2 OPatch Utility Information

You must use the OPatch utility version 11.2.0.1.0 or later to apply this patch. Oracle recommends that you use the latest released OPatch 11.2, which is available for download from My Oracle Support patch 6880880 by selecting the 11.2.0.0.0 release.

For information about OPatch documentation, including any known issues, see My Oracle Support Note 293369.1 OPatch documentation list.

2.3 Patch Installation

These instructions are for all Oracle Database installations.

2.3.1 Patch Pre-Installation Instructions

Before you install PSU 11.2.0.1.2, perform the following actions to check the environment and to detect and resolve any one-off patch conflicts.

2.3.1.1 Environments with ASM

If you are installing the PSU to an environment that has Automatic Storage Management (ASM), note the following:

  • For Linux x86 and Linux x86-64 platforms, install either (A) the bug fix for 8898852 and the Database PSU patch 9654983, or (B) the Grid Infrastructure PSU patch 9343627.
  • For all other platforms, no action is required. The fix for 8898852 was included in the base 11.2.0.1.0 release.

2.3.1.2 Environment Checks
  1. Ensure that the $PATH definition has the following executables: make, ar, ld, and nm.The location of these executables depends on your operating system. On many operating systems, they are located in /usr/ccs/bin, in which case you can set your PATH definition as follows:
    export PATH=$PATH:/usr/ccs/bin
    

2.3.1.3 One-off Patch Conflict Detection and Resolution

For an introduction to the PSU one-off patch concepts, see “Patch Set Updates Patch Conflict Resolution” in My Oracle Support Note 854428.1 Patch Set Updates for Oracle Products.

The fastest and easiest way to determine whether you have one-off patches in the Oracle home that conflict with the PSU, and to get the necessary conflict resolution patches, is to use the Patch Recommendations and Patch Plans features on the Patches & Updates tab in My Oracle Support. These features work in conjunction with the My Oracle Support Configuration Manager. Recorded training sessions on these features can be found in Note 603505.1.

However, if you are not using My Oracle Support Patch Plans, follow these steps:

  1. Determine whether any currently installed one-off patches conflict with the PSU patch as follows:
    unzip p9654983_11201_<platform>.zip
    opatch prereq CheckConflictAgainstOHWithDetail -phBaseDir ./9654983
    
  2. The report will indicate the patches that conflict with PSU 9654983 and the patches for which PSU 9654983 is a superset.Note that Oracle proactively provides PSU 11.2.0.1.2 one-off patches for common conflicts.
  3. Use My Oracle Support Note 1061295.1 Patch Set Updates – One-off Patch Conflict Resolution to determine, for each conflicting patch, whether a conflict resolution patch is already available, and if you need to request a new conflict resolution patch or if the conflict may be ignored.
  4. When all the one-off patches that you have requested are available at My Oracle Support, proceed with Section 2.3.2, “Patch Installation Instructions”.

2.3.2 Patch Installation Instructions

Follow these steps:

  1. If you are using a Data Guard Physical Standby database, you must first install this patch on the primary database before installing the patch on the physical standby database. It is not supported to install this patch on the physical standby database before installing the patch on the primary database. For more information, see My Oracle Support Note 278641.1.
  2. Do one of the following, depending on whether this is a RAC environment:
    • If this is a RAC environment, choose one of the patch installation methods provided by OPatch (rolling, all node, or minimum downtime), and shutdown instances and listeners as appropriate for the installation method selected.This PSU patch is rolling RAC installable. Refer to My Oracle Support Note 244241.1 Rolling Patch – OPatch Support for RAC.
    • If this is not a RAC environment, shut down all instances and listeners associated with the Oracle home that you are updating. For more information, see Oracle Database Administrator’s Guide.
  3. Set your current directory to the directory where the patch is located and then run the OPatch utility by entering the following commands:
    unzip p9654983_11201_<platform>.zip
    cd 9654983
    opatch apply
    
  4. If there are errors, refer to Section 3, “Known Issues”.

2.3.3 Patch Post-Installation Instructions

After installing the patch, perform the following actions:

  1. Apply conflict resolution patches as explained in Section 2.3.3.1.
  2. Load modified SQL files into the database, as explained in Section 2.3.3.2.

2.3.3.1 Applying Conflict Resolution Patches

Apply the patch conflict resolution one-off patches that were determined to be needed when you performed the steps in Section 2.3.1.3, “One-off Patch Conflict Detection and Resolution”.

2.3.3.2 Loading Modified SQL Files into the Database

The following steps load modified SQL files into the database. For a RAC environment, perform these steps on only one node.

  1. For each database instance running on the Oracle home being patched, connect to the database using SQL*Plus. Connect as SYSDBA and run the catbundle.sql script as follows:
    cd $ORACLE_HOME/rdbms/admin
    sqlplus /nolog
    SQL> CONNECT / AS SYSDBA
    SQL> STARTUP
    SQL> @catbundle.sql psu apply
    SQL> QUIT
    

    The catbundle.sql execution is reflected in the dba_registry_history view by a row associated with bundle series PSU.

    For information about the catbundle.sql script, see My Oracle Support Note 605795.1 Introduction to Oracle Database catbundle.sql.

  2. Check the following log files in $ORACLE_HOME/cfgtoollogs/catbundle for any errors:
    catbundle_PSU_<database SID>_APPLY_<TIMESTAMP>.log
    catbundle_PSU_<database SID>_GENERATE_<TIMESTAMP>.log
    

    where TIMESTAMP is of the form YYYYMMMDD_HH_MM_SS. If there are errors, refer to Section 3, “Known Issues”.

2.3.4 Patch Post-Installation Instructions for Databases Created or Upgraded after Installation of PSU 11.2.0.1.2 in the Oracle Home

These instructions are for a database that is created or upgraded after the installation of PSU 11.2.0.1.2.

You must execute the steps in Section 2.3.3.2, “Loading Modified SQL Files into the Database” for any new database only if it was created by any of the following methods:

  • Using DBCA (Database Configuration Assistant) to select a sample database (General, Data Warehouse, Transaction Processing)
  • Using a script that was created by DBCA that creates a database from a sample database

2.4 Patch Deinstallation

These instructions apply if you need to deinstall the patch.

2.4.1 Patch Deinstallation Instructions for a Non-RAC Environment

Follow these steps:

  1. Verify that an $ORACLE_HOME/rdbms/admin/catbundle_PSU_<database SID>_ROLLBACK.sql file exists for each database associated with this ORACLE_HOME. If this is not the case, you must execute the steps in Section 2.3.3.2, “Loading Modified SQL Files into the Database” against the database before deinstalling the PSU.
  2. Shut down all instances and listeners associated with the Oracle home that you are updating. For more information, see Oracle Database Administrator’s Guide.
  3. Run the OPatch utility specifying the rollback argument as follows.
    opatch rollback -id 9654983
    
  4. If there are errors, refer to Section 3, “Known Issues”.

2.4.2 Patch Post-Deinstallation Instructions for a Non-RAC Environment

Follow these steps:

  1. Start all database instances running from the Oracle home. (For more information, see Oracle Database Administrator’s Guide.)
  2. For each database instance running out of the ORACLE_HOME, connect to the database using SQL*Plus as SYSDBA and run the rollback script as follows:
    cd $ORACLE_HOME/rdbms/admin
    sqlplus /nolog
    SQL> CONNECT / AS SYSDBA
    SQL> STARTUP
    SQL> @catbundle_PSU_<database SID>_ROLLBACK.sql
    SQL> QUIT
    

    In a RAC environment, the name of the rollback script will have the format catbundle_PSU_<database SID PREFIX>_ROLLBACK.sql.

  3. Check the log file for any errors. The log file is found in $ORACLE_HOME/cfgtoollogs/catbundle and is named catbundle_PSU_<database SID>_ROLLBACK_<TIMESTAMP>.log where TIMESTAMP is of the form YYYYMMMDD_HH_MM_SS. If there are errors, refer to Section 3, “Known Issues”.

2.4.3 Patch Deinstallation Instructions for a RAC Environment

Follow these steps for each node in the cluster, one node at a time:

  1. Shut down the instance on the node.
  2. Run the OPatch utility specifying the rollback argument as follows.
    opatch rollback -id 9654983
    

    If there are errors, refer to Section 3, “Known Issues”.

  3. Start the instance on the node as follows:
    srvctl start instance
    

2.4.4 Patch Post-Deinstallation Instructions for a RAC Environment

Follow the instructions listed in Section Section 2.4.2, “Patch Post-Deinstallation Instructions for a Non-RAC Environment” only on the node for which the steps in Section 2.3.3.2, “Loading Modified SQL Files into the Database” were executed during the patch application.

All other instances can be started and accessed as usual while you are executing the deinstallation steps.

3 Known Issues

For information about OPatch issues, see My Oracle Support Note 293369.1 OPatch documentation list.

For issues documented after the release of this PSU, see My Oracle Support Note 1089071.1 Oracle Database Patch Set Update 11.2.0.1.2 Known Issues.

Other known issues are as follows.

Issue 1
The following ignorable errors may be encountered while running the catbundle.sql script or its rollback script:

ORA-29809: cannot drop an operator with dependent objects
ORA-29931: specified association does not exist
ORA-29830: operator does not exist
ORA-00942: table or view does not exist
ORA-00955: name is already used by an existing object
ORA-01430: column being added already exists in table
ORA-01432: public synonym to be dropped does not exist
ORA-01434: private synonym to be dropped does not exist
ORA-01435: user does not exist
ORA-01917: user or role 'XDB' does not exist
ORA-01920: user name '<user-name>' conflicts with another user or role name
ORA-01921: role name '<role name>' conflicts with another user or role name
ORA-01952: system privileges not granted to 'WKSYS'
ORA-02303: cannot drop or replace a type with type or table dependents
ORA-02443: Cannot drop constraint - nonexistent constraint
ORA-04043: object <object-name> does not exist
ORA-29832: cannot drop or replace an indextype with dependent indexes
ORA-29844: duplicate operator name specified
ORA-14452: attempt to create, alter or drop an index on temporary table already in use
ORA-06512: at line <line number>. If this error follow any of above errors, then can be safely ignored.
ORA-01927: cannot REVOKE privileges you did not grant

4 References

The following documents are references for this patch.

Note 293369.1 OPatch documentation list

Note 360870.1 Impact of Java Security Vulnerabilities on Oracle Products

Note 468959.1 Enterprise Manager Grid Control Known Issues

Note 9352237.8 Bug 9352237 – 11.2.0.1.1 Patch Set Update (PSU)

5 Bugs Fixed by This Patch

This patch includes the following bug fixes.

5.1 CPU Molecules

CPU molecules in PSU 11.2.0.1.2:

PSU 11.2.0.1.2 contains the following new CPU molecules:

9676419 – DB-11.2.0.1-MOLECULE-004-CPUJUL2010

9676420 – DB-11.2.0.1-MOLECULE-005-CPUJUL2010

5.2 Bug Fixes

PSU 11.2.0.1.2 contains the following new fixes:

Automatic Storage Management

8755082 – ORA-00600: [KCFIS_TRANSLATE4:VOLUME LOOKUP], [2], [WRONG DEVICE NAME], [], [], [

8890026 – ASM PARTNERING CREATES IMBALANCED PARTNERSHIPS

9170608 – STBH:DD BLOCKS PINNED FOR QUERIES THAT DO NOT REQUEST USED SPACE

9363145 – STBH:DB INSTANCES TERMINATED BY ASMB DUE TO ORA-00600 [KFDSKALLOC0]

Buffer Cache

8330783 – HANGING DB WITH “CACHE BUFFER CHAINS” AND “BUFFER DEADLOCK” WAITS DURING INSERT

8822531 – TAKING AWR SNAP HANGS

Data Guard Broker

8918433 – UNPERSISTED FSFO STATE BITS CAN GET PERSISTED

9363384 – PHYSICAL STANDBY SERVICES NOT STARTED AFTER CONVERT FROM SNAPSHOT

9467635 – BROKER’S METADATA FILE UPGRADE TO 11.2 IS BROKEN

9467727 – GETSTATUS DOC YIELDS INCORRECT RESULT IF DBRESOURCE_ID PROP VALUE IS USED

Data Guard Logical

8774868 – LGSBFSFO: ORA-600 [3020], [3], [138] RAISED IN RECOVERY SLAVE

8822832 – V$ARCHIVE_DEST_STATUS HAS INCORRECT VALUE FOR APPLIED_SEQ#

DataGuard Redo Transport

8872096 – ARCHIVING FORCED DURING CLOSE WHEN NO STANDBY IS PRESENT

9399090 – STBH: CONSTANT/HIGH FREQUENT LOG SWITCHES ON BEEHIVE DATABASE IN THE LAST 3 DAYS

Shared Cursors

8865718 – RECURSIVE CURSORS CONTAINING “AS OF SNAPSHOT” CLAUSE ARE NOT SHARED

8981059 – HIGH VERSION COUNT:BIND_MISMATCH,USER_BIND_PEEK_MISMATCH,OPTIMIZER_MODE_MISMATCH

9010222 – APPS ST 11G ORA-00600 [KKSFBC-REPARSE-INFINITE-LOOP]

9067282 – TB:SH:ORA-00600:[KKSFBC-WRONG-KKSCSFLGS] WHILE RUNNING TPC-H

DML Drivers

9255542 – ARRAY INSERT TO PARTITIONED TABLE LOOSES ROWS DUE TO CONCURRENT DDL (ORA-14403)

9488887 – FORIEGN KEY VIOLATION WITH ARRAY-INSERT AND ONLINE IDX REBUILD AFTER BUG-9255542

Flashback Database

8834425 – ORA-240 IN RVWR PROCESS CAUSING 5MIN TRANSACTIONAL HANG

PLSQL

9210925 – AFTER MANUAL UPGRADE TO 11.1.0.7 PL/SQL CALLS INCORRECT FUNCTION

Automatic Memory Management

8505803 – PRE_PAGE_SGA RESULTS IN EXCESSIVE PAGE TABLE SIZE WHEN USING MEMORY_TARGET [AMM]

Partitioning

9165206 – PARTITIONING ORA-600 [KKPOLLS1] / [KKDOILSF1] – DURING PARTITION MAINTANANCE

Real Application Cluster

8875671 – LX64: ORA-600 ARGS [KJPNP_CHK:!MASTER_READY],

9093300 – LOTS OF REPEATED KJXOCDR: DROP DUPLICATE OPEN MESSAGE IN LMD TRACE

Row Access Method

8544696 – TABLE GROWTH – BLOCKS ARE NOT REUSED

Streams

8650719 – DOWNSTREAM CAPTURE ABORTS WITH ORA-26766

Secure Files

8856478 – RAM SECUREFILE PERF DEGRADATION WITH SF COMPRESSION ON SMALL LOBS DURING ATB MOVE

9272086 – STBH: DATA PUMP WRITER SEEMS TO BE WAITING ON WAIT FOR UNREAD MESSAGE ON BROADCA

DB Recovery

8909984 – APPSST GSI 11G: GAPS IN AWR SNAPSHOTS

9068088 – MEDIA RECOVERY WAS HUNG ON STANDBY

9145541 – ORA-600 [25027] / ORA-600 [4097] FOR ACTIVE TX IN A PLUGGED TABLESPACE

9167285 – PKT-BUGOLTP: ORA-07445: [KCRALC()+87]

Space Management

7519406 – ‘J000’ TRACE FILE REGARDING GATHER_STATS_JOB INTERMITTENTLY SINCE 10.2.0.4

8815639 – [11GR2-LNX-090813] MULTIPLE INSERT CAUSE DATA ALLOCATION ABOVE HHWM

9216806 – HIGH “ENQ: TS – CONTENTION” FOR TEMPORARY SEGMENT WHILE SQLLDR DIRECT PATH LOAD

9242411 – STRESS-BIGBH: LOTS OF OR-3113S IN BIGBH STRESS TEST

9461782 – ORA-7445 [KTSLF_SUMFSG()+54] [SIGSEGV] AND KTSLFSUM_CFS ON CALL STACK

Compression

9011088 – [11GR2]ADDING COLUMN TO COMPRESSED TABLE, DATA LOSS OCCURED.

9275072 – APPSST GSI 11G : BUFFER BUSY WAITS INSERTING INTO TABLES

9341448 – APPSST GSI 11G : BUFFER BUSY WAITS AND LATCH: CACHE BUFFERS WAITS WHEN INSERTING

9637033 – ORA-07445[KDR9IR2RST0] INSERT AS SELECT IN A COMPRESSED TABLE WITH > 255 COLUMNS

SQL Execution

8664189 – ORA-00600 [KDISS_UNCOMPRESS: BUFFER LENGTH]

9119194 – PSRC: DISTRIBUTED QUERY SLOWER IN 10.2.0.4 COMPARED TO 10.2.0.3

Transaction Management

8268775 – PERF: HIGH US ENQUEUE CONTENTION DURING A LOGIN STORM OR SESSION FAILOVER

8803762 – ORA-00600 [KDSGRP1] BLOCK CORRUPTION ON 11G DATABASE UPGRADE

Memory Management

8431487 – INSTANCE CRASH ORA-07445 [KGGHSTFEL()+192] ORA-07445[KGGHSTMAP()+241]

Message

9713537 – ENHANCE CAUSE/ACTION FIELDS OF THE INTERNAL ERROR ORA-00600

9714832 – ENHANCE CAUSE/ACTION FIELDS OF THE INTERNAL ERROR ORA-07445

Comment

*

沪ICP备14014813号-2

沪公网安备 31010802001379号