Oracle Applications Manager > Concurrent Managers OR Concurrent Requests > Site Map > Diagnostics and Repair > Concurrent Manager Recovery
介绍了 Concurrent Manager Recovery ,路径如上 尝试使用该功能
否则
locate adstpall.sh
locate adstrtal.sh
adstpall.sh ==》关闭所有EBS
adstrtal.sh ==> 启动所有EBS
shutdown immediate;
startup; ==> 重启数据库
cmclean.sql ==》 使用apps 用户执行
==》 如果还不行, 建议他开一个SR,就说可能是bug 。
Concurrent Processing - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables (Doc ID 134007.1) Manager Status Shows System Hold, Fix Manager before resetting counters (Doc ID 1507580.1) To BottomTo Bottom Modified:22-Nov-2012Type:PROBLEM Rate this document Email link to this document Open document in new window Printable Page In this Document Symptoms Changes Cause Solution References This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process and therefore has not been subject to an independent technical review. Applies to: Oracle Concurrent Processing - Version 12.1.3 and later Information in this document applies to any platform. Symptoms The Administer Concurrent Managers screen shows the Scheduler/Prereleaser Manager with a status / state of "System Hold, Fix Manager before resetting counters" Changes This issue started after bouncing all servers. Cause An orderly shutdown of the concurrent manager was not performed. The CP Diagnostic Request Analyzer" shows that a CP Shutdown was initiated at on 16-OCT-12 at 22:22:41 and then cancelled. Yet, the database alert log file shows that the database was shutdown within four seconds of the concurrent managers being shutdown/cancelled, not providing enough time to perform an orderly shutdown of the concurrent processing server. Solution 1. Shutdown the Concurrent Processing (CP) server in an orderly manner and verify that the shutdown is complete before invoking a shutdown of the database and/or the database listener. Check the last CP process to exit/terminate, the Internal Manager, with the Unix command: ps -ef | grep FNDLIBR If a manual shutdown is being performed, use the same sequence found in the adstpall.sh – "Stop All Oracle E-Business Suite Enabled Services" script: first the CP Server--once down--shutdown the App Listener, the Forms Server, the Web (Apache) Server. Lastly, if necessary, shut down the database listener and/or database. Note 1: The start up is the same, but in reverse order. In this case, a complete bounce of all servers (apps/db tier) restored a normal manager status/state. 2. In the event that the CP server was not shutdown properly, run cmclean.sql as per Doc ID Note 134007.1. In some cases, it may be necessary to bounce the database. Note 2: Shutting down the database or the listeners without an orderly shutdown of the Concurrent Processing server is the equivalent of pulling the power cord on a Unix box. 999 times out of 1000, the Unix system will recover without any incident; however, at some point file/disk corruption or an odd state will occur; similarly, the same applies to the CP server, manager queue and process state information may not be current or correct. Note 3: The cmclean.sql script is a safe script created by CP Development. It is a helpful script for re-initializing the managers, particularly when a manager's normal operation may have been compromised by manual intervention by a DBA or System Administrator (by manual killing of OS / RDBMS processes) or due to unplanned system outages (an accidental closing of the database without doing an orderly shutdown of the concurrent managers, power / network outages, etc). References NOTE:134007.1 - Concurrent Processing - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables Concurrent Processing - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables (Doc ID 134007.1) To BottomTo Bottom Modified:23-Oct-2013Type:SCRIPT Language: Rate this document Email link to this document Open document in new window Printable Page Applies to: Oracle Concurrent Processing - Version 11.5.10.0 to 12.2 [Release 11.5 to 12.2] Information in this document applies to any platform. Checked for relevance on 13-APR-2013 Applications Install 10.7 to 12.1.3 Purpose This document provides a reference to self service Cleaning the Concurrent Manager tables Non Destructive Script to Clean Concurrent Manager Tables NOTE: This script works with 10.7, 11.0, 11.5 & 12.1.3 Applications. Information Center, Diagnostics, & Community E-Business Concurrent Processing Information Center Document 1304305.1 Please reference this document regularly to review current offerings for Concurrent Processing needs. Diagnostics For additional help, please refer to one of the following documents on diagnostics to address current needs. Providing diagnostic output on an issue for support when logging a service request is very helpful. Document 179661.1 for 11i or Document 421245.1 for Rel 12.x Core Concurrent Processing Community Visit the Core Concurrent Processing community for help from industry experts or to share knowledge. Requirements SQLplus Configuring Copy from the first REM statement to the last REM statement of this document and save as: cmclean.sql. NOTE: Ensure that No FNDLIBR processes are running as detailed within the Troubleshooting Note 104541.1 and that the Concurrent Manager is down. Issue a commit once the script is run for the changes to take effect. Instructions Please run the Concurrent Manager Recovery feature to address any Concurrent Manager / Concurrent Processing issues within the Oracle Application Manager. Using the Concurrent Manager Recovery wizard is the method to clear the errors upon bringing the internal manager back up. The cmclean script can still be used for Application instances provided the managers are down and no FNDLIBR processes are still running. For Concurrent Internal Manager failures, it is recommended to run the Concurrent Manager Recovery feature using the Oracle Applications Manager. This feature should be used for recovering from when the Internal Manager won't start. This is accessed from the Troubleshooting wizards available within applications logged in as the sysadmin userid. Navigate: Oracle Applications Manager > Concurrent Managers OR Concurrent Requests > Site Map > Diagnostics and Repair > Concurrent Manager Recovery For information on the Concurrent Manager Recovery feature, please reference the Oracle Applications System Administrator's Guide - Maintenance provides information for frequent tasks such as monitoring your system with Oracle Applications Manager, administering Oracle E-Business Suite Secure Enterprise. Search, managing concurrent managers and reports, using diagnostic utilities including logging, managing profile options, and using alerts. To run cmclean.sql: Usage: sqlplus @cmclean Caution This sample code is provided for educational purposes only, and is not supported by Oracle Support. It has been tested internally, however, we do not guarantee that it will work for you. Ensure that you run it in your test environment before using. Script REM REM FILENAME REM cmclean.sql REM DESCRIPTION REM Clean out the concurrent manager tables REM NOTES REM Usage: sqlplus @cmclean REM REM REM $Id: cmclean.sql,v 1.4 2001/04/07 15:55:07 pferguso Exp $ REM REM REM +======================================================================+ set verify off; set head off; set timing off set pagesize 1000 column manager format a20 heading 'Manager short name' column pid heading 'Process id' column pscode format a12 heading 'Status code' column ccode format a12 heading 'Control code' column request heading 'Request ID' column pcode format a6 heading 'Phase' column scode format a6 heading 'Status' WHENEVER SQLERROR EXIT ROLLBACK; DOCUMENT WARNING : Do not run this script without explicit instructions from Oracle Support *** Make sure that the managers are shut down *** *** before running this script *** *** If the concurrent managers are NOT shut down, *** *** exit this script now !! *** # accept answer prompt 'If you wish to continue type the word ''dual'': ' set feed off select null from &answer; set feed on REM Update process status codes to TERMINATED prompt prompt ------------------------------------------------------------------------ prompt -- Updating invalid process status codes in FND_CONCURRENT_PROCESSES set feedback off set head on break on manager SELECT concurrent_queue_name manager, concurrent_process_id pid, process_status_code pscode FROM fnd_concurrent_queues fcq, fnd_concurrent_processes fcp WHERE process_status_code not in ('K', 'S') AND fcq.concurrent_queue_id = fcp.concurrent_queue_id AND fcq.application_id = fcp.queue_application_id; set head off set feedback on UPDATE fnd_concurrent_processes SET process_status_code = 'K' WHERE process_status_code not in ('K', 'S'); REM Set all managers to 0 processes prompt prompt ------------------------------------------------------------------------ prompt -- Updating running processes in FND_CONCURRENT_QUEUES prompt -- Setting running_processes = 0 and max_processes = 0 for all managers UPDATE fnd_concurrent_queues SET running_processes = 0, max_processes = 0; REM Reset control codes prompt prompt ------------------------------------------------------------------------ prompt -- Updating invalid control_codes in FND_CONCURRENT_QUEUES set feedback off set head on SELECT concurrent_queue_name manager, control_code ccode FROM fnd_concurrent_queues WHERE control_code not in ('E', 'R', 'X') AND control_code IS NOT NULL; set feedback on set head off UPDATE fnd_concurrent_queues SET control_code = NULL WHERE control_code not in ('E', 'R', 'X') AND control_code IS NOT NULL; REM Also null out target_node for all managers UPDATE fnd_concurrent_queues SET target_node = null; REM Set all 'Terminating' requests to Completed/Error REM Also set Running requests to completed, since the managers are down prompt prompt ------------------------------------------------------------------------ prompt -- Updating any Running or Terminating requests to Completed/Error canceled by CMCLEAN set feedback off set head on SELECT request_id request, phase_code pcode, status_code scode FROM fnd_concurrent_requests WHERE status_code = 'T' OR phase_code = 'R' ORDER BY request_id; set feedback on set head off UPDATE fnd_concurrent_requests SET phase_code = 'C', status_code = 'E' WHERE status_code ='T' OR phase_code = 'R'; REM Set all Runalone flags to 'N' REM This has to be done differently for Release 10 prompt prompt ------------------------------------------------------------------------ prompt -- Updating any Runalone flags to 'N' prompt set serveroutput on set feedback off declare c pls_integer := dbms_sql.open_cursor; upd_rows pls_integer; vers varchar2(50); tbl varchar2(50); col varchar2(50); statement varchar2(255); begin select substr(release_name, 1, 2) into vers from fnd_product_groups; if vers >= 11 then tbl := 'fnd_conflicts_domain'; col := 'runalone_flag'; else tbl := 'fnd_concurrent_conflict_sets'; col := 'run_alone_flag'; end if; statement := 'update ' || tbl || ' set ' || col || '=''N'' where ' || col || ' = ''Y'''; dbms_sql.parse(c, statement, dbms_sql.native); upd_rows := dbms_sql.execute(c); dbms_sql.close_cursor(c); dbms_output.put_line('Updated ' || upd_rows || ' rows of ' || col || ' in ' || tbl || ' to ''N'''); end; / prompt prompt ------------------------------------------------------------------------ prompt Updates complete. prompt Type commit now to commit these updates, or rollback to cancel. prompt ------------------------------------------------------------------------ prompt set feedback on REM <= Last REM statment -----------------------------------------------------
Comment